SKYCO OSPHO 1275 Metal Treatment-Rust Converter 1 GAL. (Factory Direct)

Description

SKYCO OSPHO
Metal Treatment-Rust Converter 1 GAL. is the #1 Metal Treatment/Rust Converter on the market today.
OSPHO
can be applied to just about
ANY
rusted or non-rusted steel surfaces including: Vehicles, Trailers, Fences, Iron Railings, Sheet Metal, Outside Tanks, Garage Doors, Lawn & Garden Equipment, Marine Vessels & Equipment, Burner Stoves, Metal Roofs, Window Trim, Steel Supports, Coins, and more....
OSPHO
can be used on
ALL
Ferrous and non-Ferrous metals and is a GREAT protectant of new metals.
OSPHO
does require solvent-based top coats. Absolutely
NO
water-based top coats as they will make the finished coating reactivate causing bubbles, blisters, and bleed thru. You can use a water-based product as long as the direct contact of the treated metal is coated with a solvent-based primer.
OSPHO
is a balanced formula of Phosphoric Acid, Dichromates, Wetting Agents, and Extenders.
OSPHO
is environmentally safe and non-flammable.
OSPHO
seals out moisture and prevents future rust from forming.
OSPHO
is primarily used for bare-metal applications but can be used on painted surfaces as long as the quality of the paint is not compromised. Test trial samples before using Epoxy or other paint systems. A paint job will last much longer after an application of
OSPHO
because subsequent paint coatings attach themselves so tightly that moisture and oxygen cannot attack the metal.
OSPHO
is water-thin, and therefor covers a larger area then paint, and goes on easily.
OSPHO
is equally effective for exterior and interior work alike.
OSPHO
safely dissolves bleeding rust from many painted surfaces. For best results, use
OSPHO
at temperatures no lower than 36*. Excess dew and humidity may prolong drying time, causing a reoccurrence of the drying process resulting in a powdery buildup. Spray equipment should be flushed out with water after using. DO NOT USE ANY METAL SPRAY EQUIPTMENT! Clean brushes with water. Avoid spreading
OSPHO
on adjacent areas such as concrete, masonry and stonework as it will etch/bleach almost immediately.
For Bulk Pricing or Discounted Shipping Rates please contact us direct at:
The Skybryte Company
3125 Perkins Ave.
Cleveland, OH 44114